24V DRIVE, HIGH SPEED LINE
THERMAL PRINTER
3” MECHANISM, WITH OR WITHOUT CUTTER
FTP-632MCL001/002/303/304
■ OVERVIEW
FTP-632MCL/FTP-622DCL Series is an ultra high speed line
thermal printer driven by 24 VDC, printing on 3-inch wide paper
(80 mm/85 mm).
This printer is compact and light weight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed
cutter is also available.
FTP-632MCL001
■ HIGHLIGHTS
• Ultra high speed printing
It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.
• Compact and lightweight
This printer has a low profile of only 20 mm, and a light
weight of approximately 94 g.
• Low power consumption
The peak current for head driving is approximately 2.9 A (at
80 mm/s printing speed, 50% printing ratio).
FTP-632MCL303/304
• Easy head access
It is designed for easy head cleaning and head replacement.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• ESC/POSTM*1 Commands
The commands conform to ESC/POSTM.
• Auto Cutter
Printer with auto cutter (full cut/partial cut) is also available.
• UL Recognized
File No.E171434
*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.
FTP-622DCL001
1
FTP-632MCL001/002/303/304
(Continued)
Item
Specifications
Part number
Interface
FTP-632MCL001/002
FTP-632MCL303/304
Centronics (ESC/POSTM), RS232C
24 VDC ± 5%, Voltage
2
Current : average*
(
): Peak
For head
1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
Power supply
Dimensions
For motor
24 VDC ± 5%, 1.0 A maximum
For cutter
---
24 VDC ± 5%, 1.0 A maximum
For logic
5 VDC ± 5%, 0.5 A maximum
108 (W) × 48 (D) × 20 (H) mm (Excluding lever)
131 (W) × 89 (D) × 24 (H) mm
approximately 94 g
Mechanism
Interface board
117 (W) × 57 (D) × 38 (H) mm
Weight
approximately 330 g
Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard driving
method)
Wear resistance : 50 km (at 25% printing ratio)
Expected life
Mechanism
Cutter
---
500,000 cuts
3
Operating temperature 0 to +50°C*
Environmental
conditions
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head-up
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
Detection
By photointerrupter
By microswitch
For front insertion use (80 mm width)
For rear insertion use (85 mm width)
*Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
: FTP-030PU001, FTP-030P0701
: FTP-030P0020, FTP-030P0702
Recommended thermal sensitive paper
: PD150R, PD160R, PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1, AFP-235
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5°C ~+40°C.
3
FTP-632MCL001/002/303/304
■ DIMENSIONS
Mechanism
FTP-632MCL001/002
PAPER INSERTION(MCL001)
20.1
HEAD UP LEVER(AT HEAD DOWN)
CENTER OF PAPER
PAPER
INSERTION
(MCL002)
HEAD CONNECTOR
76.8(POSITIONING HOLE PITCH)
+
1
57.0 –
50.9
Unit: mm
(107.9)
Interface board
130.8
120.7
116.8
87.6
19.1
5.1
5.1
CN2**
CN5
CN3
4—ø3.6
CN10
CN11*
CN13
5.1
5.1
43.2
95.4
105.4
120.7
*CN11 on FTP-622DCL011/111 & 622DSL011/112 only
**CN2 on FTP- 622DSL only
Unit: mm
4
FTP-632MCL001/002/303/304
■ DIMENSIONS
Mechanism
FTP-632MCL303/304
(cutter cable)
(motor cable)
Unit: mm
Interface board
130.8
120.7
116.8
87.6
5.1
5.1
19.1
CN2*
CN5
CN3
4-Ø3.6
CN11
CN13
CN10
5.1
5.1
43.2
86.4
105.4
120.7
Unit: mm
*CN2 on FTP-622DSL only
5
FTP-632MCL001/002/303/304
■ CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM
1. Thermal Head
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent
Board side : PHR-16 (J.S.T.) or equivalent
*1: Symbol: " " means a negative logic signal
Thermal head heat sink
Motor
Head up level
1, 2, 3, ......................................15, 16
Connector Pin No.
2. Motor connectors
3. Sensor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
Sensor
: PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
6
FTP-632MCL001/002/303/304
4. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
■ FUNCTION
ITEM
ITEM
8. Cutter trouble detection
9. Motor power save
1.
2.
3.
4.
5.
6.
7.
Test printing
Paper-out detection
Paper near end detection
Head-up detection
10.
11.
12.
13.
14.
Mark detection
MCU trouble detection
Power on/off sequence protection
Motor protection
Abnormal temperature detection of thermal head
Blown fuse detection
Abnormal voltage detection of head
Hardware timer
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and
Options.
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Email: marcom@fcai.fujitsu.com
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/2002
7
|
Echo Trimmer RM 4000 User Manual
Extron electronic Network Card 13W3 to VGA User Manual
Garland Food Warmer ED 15THSE User Manual
Garland Oven MCO GD 10 User Manual
GE Cooktop JGP600AEH User Manual
GE Monogram Cooktop ZGU36L4RHSS User Manual
GE Monogram Refrigerator B480DX User Manual
GE Monogram Refrigerator ZFSB25DXSS User Manual
Genesis Advanced Technologies Cordless Drill GHD1260 User Manual
GE Water System GNUT05Z01 User Manual